Gunzilla™ BC-10 is a patent pending gun cleaning formula which was developed for the military, made from agriculturally based chemicals. Gunzilla™ can be used on everything from small handguns to 16” guns. Gunzilla™ is a one step cleaner designed to clean, lubricate, and protect, all in one formula. Gunzilla™ removes rust, lead, copper, plastic, carbon and even cleans corrosive ammo.

Gunzilla™ can be used on all smokeless and black powder guns,  and eliminates the need to use soap and water when cleaning black powder guns.  It also eliminates oiling after cleaning. You will find among its benefits: Low odor   No Phenol   No Teflon   Non-corrosive   No ammonia  Non-flammable
 

Copperzilla™ Non-toxic gun cleaning copper remover from Gunzilla. Copperzilla is a quick copper, lead and plastic remover.Copperzilla is made from plant derived based materials, is non flammable and has virtually no odor.Copperzilla does not contain any ammonia or petroleum solvents. Copperzilla can be left on any steel or stainless barrel for an extended period of time without harming the barrel.Copperzilla is designed to be used with Gunzilla BC-10 when cleaning the bore. It is applied to a patch or nylon/plastic brush and then a coating is placed on the bore. Copperzilla should remain on the bore for 20 to 30 minutes and then dry patched out. If all the copper is removed then Gunzilla BC-10 should be used to clean, lubricate and protect the bore along with the remaining parts of the weapon.Copperzilla will remove the most difficult and severe copper, lead and plastic fouling quickly within 30 minutes without hurting the boreContains no hazardous materials - Made from plants (no water, no petroleum)
 

Superzilla™ AP-10 is specifically designed to lubricate, penetrate, clean, displace moisture, and protect all metals.  It is a patent pending formula made from plants and contains no water, no petroleum, is non-flammable, non-corrosive, and is a non-hazardous formula. Superzilla™ AP-10 will remove grease, oil, rust, carbon, exhaust stains, permanent marker, caulking, ink, pine sap, crayon, scuff marks, soot, and label adhesives. Also useable as a cutting oil for mills, lathes, bandsaws, etc. Superzilla™ AP-10 leaves a non-ionic coating that does not attract or retain particles.

Superzilla™ AP-10 is low odor, and is a USDA certified BioBased product.
 

Includes:

All containers are refillable.

Important product directions:
Gunzilla & Copperzilla
Superzilla